The very first lens I bought to go with my X-E1 kit back in 2013 was the 60mm f2.4. Back then there were precisely 4 X-mount lens to choose from; the 18mm, the 35mm, the 60mm and the 18-55mm zoom. Not much compared to today’s lineup! At the time I wanted a lens I could use for some portraits at a friend’s wedding, so I bought the 60mm as it’s a reasonable focal length for that purpose.
Unfortunately the day of the wedding was incredibly gloomy and overcast, to top it off the venue itself was very dimly lit. If you remember what it was like trying to shoot an X-E1 on 1.0 firmware with the 60mm 2.4 also on 1.0 firmware back then, you can probably guess that things did not go well! The focus was grindingly slow and frequently failed entirely, I got a few shots, but overall the experience had me wondering if I’d made a terrible mistake switching away from a DSLR.
Thankfully over time the firmware of both the X-E1 and lens were improved and the performance moved from nearly unusable in imperfect light to just about passable. In good light the lens performance was already much better and while still no speed demon, subsequent updates have helped to make it a little snappier. Where it fell down in speed, it made up for it in rendering; producing images packed with detail and with a lush creamy bokeh that blew my 18-55mm wide open at 55mm out of the water. I grew to really enjoy using it for landscape, street and the odd bit of macro photography.
After about two years of using and enjoying the lens tremendously I found myself starting to get a lot of missed shots where the camera had claimed to focus and where the image looked sharp enough in the viewfinder, but where the whole image was noticeably out-of-focus when viewed up large. I’m not sure if this was just a run of bad luck, the result of a firmware update or something else (the lens would still reliably focus enough that I was sure it wasn’t broken). Anyway I decided I’d had enough, so I put it on eBay and bought the 55-200mm f3.5.-4.8.
A few months later I found myself in possession of an X-T10 and missing the 60mm as a compact and lightweight short telephoto option. With a holiday coming up that I wanted to pack fairly lightly for, I decided I’d reacquire a copy of the 60mm and give it a second chance. After looking on eBay I found one in mint condition at a bargain price of £219 and snapped it up. I’m pleased to say the performance and focus accuracy of the lens paired with the X-T10 is hugely improved. It’s still not going to satisfy those trying to capture fast action, but for most other uses it’s now a solid performer and I’ve not had any more false focus confirmations.
Build and Handling
As with all Fuji XF lenses, the 60mm is well made in a mixture of quality plastics and metal. As one of Fuji’s older lens designs, it’s doesn’t feature internal focusing and the front element can extend out of the lens barrel by around an inch at macro distances. At non-macro working distances it barely moves from the main lens body at all.
The lens features an awkward 39mm filter ring size, which it shares only with Fuji’s 27mm f2.8 pancake lens and precious little else from other manufacturers. This can make finding filters a challenge. To make matters worse, Fuji decided to recess the filter thread behind the outer ring of the lens barrel. This means the only way you can fit a step-up adapter is to knock out the glass from a 39mm UV filter and use that as a go between to give the necessary clearance from the filter ring to the front of the lens. It’s a messy solution, but if you need to use ND filters or a polariser it may be your only option. If Fuji ever releases a mark 2 version of this lens I hope it’s an area they address.
The 60mm has a large, smooth turning focus ring that will let you dial in precise adjustments when shooting in macro. The only downside to this is that it can make demounting the lens a little tricky, as there’s very little of it that is non-rotating. The aperture ring offers a decent level of resistance and isn’t too easy to change accidentally (unlike say the 35mm f1.4 or the 14mm f2.8).
As one of the original three lenses that launched the X series, Fuji was kind enough to bundle a high quality metal hood, complete with vents to improve its handling on X-Pro bodies. The hood is really big – it nearly doubles the overall length of the lens when attached. I find I rarely carry mine any more. The front element is deeply recessed already, so the hood doesn’t offer that much more physical protection and it’s already fairly hard to make the lens flare. The hood can be reversed for storage, but unfortunately then completely blocks the aperture ring and makes it near impossible to dismount the lens from the camera body.
Note: The three original Fuji lenses (18, 35 & 60) all share the same physical hood mount, which makes them interchangeable – albeit with caveats. On the 60mm the 18mm’s hood will block the front element at macro distances but I hear the 35mm’s hood will work quite well with it and doesn’t vignette.
As I mentioned in the build up, the detail and overall rendering from this lens is very pleasing. It produces lovely creamy bokeh and thanks to its 9 blade aperture, out-of-focus highlights remain nice and round even when stopped down – a feature that curiously sets it ahead of Fuji’s fast portrait primes. You can get decent subject separation at f2.4 when shooting portraits, although obviously it’s not in the same league as the 56mm f1.2.
The 60mm isn’t fully optically corrected and some digital distortion correction is applied both in camera and by Lightroom. The only way to avoid that correction is to use a RAW processor that lets you turn it off, such as Iridient Developer. Thankfully the corrections applied have a minimal impact on the overall image quality which remains high throughout the range, only really falling off as you start to push past f11. In my limited testing so far, the 60 seems to hold its own on the new 24 megapixel X-Trans 3 sensor.
Roll over this image to see the pincushion distortion that the lens has when uncorrected. The slight change in colours is down to one image being processed in Lightroom and the other in Iridient.
It’s easy to forget this is a macro lens as I find it such a versatile focal length for landscape and portraiture – but it does have the ability to focus as close as 26cm (just under 1ft) and produces a 1:2 magnification. That certainly won’t satisfy hardcore macro shooters, but as a handy addition to an already versatile lens it’s a welcome feature.
I think the 60mm has always been a bit of an underrated lens in the XF lineup. Being both optically very decent and a versatile focal length, but struggling to shake off its early reputation for sluggish performance. While that reputation used to be well deserved in the early days, Fuji has advanced focus speed in its recent cameras by leaps and bounds and the 60 benefits from that a lot. It will never be anyone’s first choice for fast paced sports or action photography and it will likely remain overshadowed by the 56mm f1.2 for portraiture. However for people like me, who have persevered and gradually been rewarded by Fuji’s kaizen philosophy, or those who are just now entering the Fuji system with a modern camera body, it’s a lens that has a breadth of utility that remains unmatched by any other prime on the X system. Portraiture, street, landscape, macro – no other single Fuji prime can offer that range of versatility at the present time. The 60mm will remain a very special piece of glass for the foreseeable future, despite its few quirks and shortcomings. Let me leave you with a selection of some my favourite images that I’ve taken with the 60mm over the last few years.
If you enjoy my images and reviews please consider buying a print from my store here or on Etsy.
6 thoughts on “Fuji 60mm f2.4 R Macro Long-term Use Review”
Just looking at your images.
Are you from the Hebden Bridge area by any chance?
Guilty as charged!
Lovely photos and review.